C100_110-160_180.FB 7 Tue Jul 16 06:36:50 1996
Removing the Main Tray Assembly
Removing the Main Tray Assembly
Once you have prepared the workstation, you need to remove the main tray from the system unit, as described in the following procedure:
1Completely loosen the four thumb screws on the rear of the system unit, as shown in Figure 2.
Thumb
Screws
Thumb Screws
Figure 2 | Removing Main Tray Assembly |
2Place one hand on the top of the system unit and push, while pulling the handle on the rear panel with your other hand. See Figure 2.
3Slide the main tray assembly out of the chassis.
7