C100_110-160_180.FB 2 Tue Jul 16 06:36:50 1996

Preparing Your Workstation

Preparing Your Workstation

Before starting the upgrade, use the following procedure to prepare the workstation:

1The workstation must be running HP-UX 10.20 or later to accommodate the C160/C180 upgrade. If the workstation is running a version of HP-UX lower than 10.2, update the operating system software before continuing.

2Determine the workstations LAN ID with the lanscan command by entering the following command:

/usr/sbin/lanscan

The output is similar to the following:

Hardware

Station

Dev

Hardware Net-Interface

NM

Encapsulation Mjr

Path

Address

lu

State

NameUnit State ID

Methods

Num

2.0.2

0x08000970ECC0 0

UP

lan0

UP

4

ETHER

52

After you install the new CPU board or I/O board and power on the system for the first time, you are prompted for the LAN ID. Record the information here so you have a record of it:

EtherLAN ID ___________________-_____________________

You must supply the dash (-) between the first six digits and the last six digits.

3Logout of your system and enter a no windows command line session as follows: HP VUE: At the login window, select Options, then select No Windows.

HP CDE: At the login window, select Option, then select

Command Line Login.

2