C100_110-160_180.FB 26 Tue Jul 16 06:36:50 1996
Installing the New Main Tray Assembly
Installing the New Main Tray Assembly
Install the new C160/C180 main tray assembly, as described in the following procedure:
1Align the main tray assembly with the chassis and slide it into place, as shown in Figure 15.
Thumb
Screws
| Thumb Screws | |
Figure 15 | Installing the New Main Tray Assembly | |
| 2 | Slide the main tray in until you feel it make contact with the internal connectors. |
| 3 | Push firmly and evenly on the main tray assembly to make sure that all connec- |
|
| tors are fully seated. |
| 4 | Start all four thumb screws loosely, then tighten them firmly. See Figure 15. |
|
| |
NOTICE: | To maintain regulatory agency compliance, verify that the main tray is | |
| fully seated and all four thumb screws are completely tightened. | |
|
|
|
26