Connect the supplied phone cord, Press the On button

7 Connect the supplied phone cord

Connect one end of the supplied phone cord to the port labelled 1-LINE and the other to a wall jack.

See the Basics Guide if you want to use your own phone cord or for help with other fax setup options.

USB cable users: Do not connect the USB cable until instructed later in this guide.

After you press the On button, wait for the prompt on the color graphics display before continuing.

HP All-in-One • 3

Image 3

Contents

Locate components Remove all tape and lift display If not attached Load paper into bottom trayLoad photo paper Press the On button Connect the power cord and adapterOpen the access door Connect the supplied phone cord Insert all six ink cartridges Lift latches inside of the device Connect the HP All-in-One Close the access door and follow the prompts USB Connection Do not connect yet Ethernet Wired NetworkWireless Network Choose ONE connection type A, B or C Section a USB Connection A1 Choose the correct CD A2 Connect the USB cable A3 Congratulations! Go to of this Setup Guide Connect the Ethernet cable Section B Ethernet wired network B2 Choose the correct CD B3 Congratulations! Go to of this setup guide Option a SecureEasySetup C1 Choose ONE wireless network option a or BC2 Establish the wireless connection Section C Wireless Network Option B Typical Wireless Setup Recommended C3 Insert the correct CD C4 Congratulations! Go to of this setup guide Install software on additional computers Go to at the back of this setup guideTroubleshooting Network Troubleshooting Print a 4 x 6 inch photo