Section B: Ethernet (wired) network

B1

b

c

d

Connect the Ethernet cable

aLocate the Ethernet cable that you may have purchased separately.

b Remove the yellow plug from the back of the device.

c Connect one end of the Ethernet cable to the Ethernet port on the back of the device.

d Connect the other end of the Ethernet cable to the router.

IMPORTANT: Your computer and the HP All-in-One must be on the same active, working network.

If you are using a DSL or cable modem, make sure you do not connect the Ethernet cable from the HP All-in-One to the cable modem. Connect it to the router only.

HP All-in-One • 9