HP Cluster Test Software manual Requirements and installation of CT RPM

•You should have access to the appropriate RPM package. Information on how to download RPMs is available in the section “Getting the CT RPM kit” (page 15).

•Prerequisite OS RPMs:

◦xinetd

◦openmpi (test binaries are built against openmpi-1.6.4)

◦hphealth (Optional. Required to run Health Check.)

◦hponcfg (Optional. Required to run Hardware and Firmware Summaries.)

•You should install the following RPMs from your OFED distribution if they are not already installed:

◦infiniband-diags

◦libibmad1

•RHEL 6.1 CT RPM Kit Dependent packages

◦tk:

◦

◦

◦

◦

◦

–tk-8.5.7-5.el6.x86_64.rpm

OpenIPMI, ipmitool, net-snmp-libs, lm_sensors-libs (needed to start ipmi service):

–OpenIPMI-2.0.16-12.el6.x86_64.rpm

–OpenIPMI-libs-2.0.16-12.el6.x86_64.rpm

–ipmitool-1.8.11-7.el6.x86_64.rpm

–net-snmp-libs-5.5-31.el6.x86_64.rpm

–lm_sensors-libs-3.1.1-10.el6.x86_64.rpm

libxml, libstdc++, zlib (32–Bit [686]RPMs needed for conrep):

–libstdc++-4.4.5-6.el6.i686.rpm

–libxml2-2.7.6-1.el6.i686.rpm

–zlib-1.2.3-25.el6.i686.rpm

Mesa-libGL-devel required to install nbody after cuda tool kit installation:

–mesa-libGL-devel-7.10-1.el6.x86_64.rpm

mcelog package to decode kernel machine check log on x86 machines used by CT memory error check:

–mcelog-1.0pre3_20110718-0.14.el6.x86_64.rpm

Install the following two font-related RPM packages from the respective DVD ISO distribution.

–urw-fonts-2.4-10.el6.noarch.rpm

–ghostscript-fonts-5.50-23.1.el6.noarch.rpm

6Requirements and installation of CT RPM