–tk-8.5.7-5.el6.x86_64.rpm
OpenIPMI, ipmitool, net-snmp-libs, lm_sensors-libs (needed to start ipmi service):
–OpenIPMI–2.0.16–14.el6.x86_64.rpm
–OpenIPMI–libs–2.0.16–14.el6.x86_64.rpm
–ipmitool–1.8.11–13.el6.x86_64.rpm
–net–snmp–libs–5.5–44.el6.x86_64.rpm
–lm_sensors–libs–3.1.1–17.el6.x86_64.rpm
libxml, libstdc++, zlib (32-bit [i686] RPMs needed for conrep):
–libstdc++-4.4.7–3.el6.i686.rpm
–libstdc++–devel–4.4.7–3.el6.x86_64.rpm
–libxml2–2.7.6–8.el6_3.4.i686.rpm
–zlib–1.2.3–29.el6.i686.rpm
Mesa-libGL-devel required to install nbody after cuda tool kit installation:
–mesa–libGL–9.0–0.7.el6.x86_64.rpm
–mesa–libGL–devel–9.0–0.7.el6.x86_64.rpm
mcelog package to decode kernel machine check log on x86 machines used by CT memory error check:
–mcelog–1.0pre3_20120814_2–0.6.el6.x86_64.rpm
Install the following two font-related RPM packages from the respective DVD ISO distribution.
–urw–fonts–2.4–10.el6.noarch.rpm
–ghostscript–fonts–5.50–23.1.el6.noarch.rpm
Other dependent packages that might be required (if not already installed):
–expect-5.44.1.15-4.el6.x86_64.rpm
–oddjob-0.30-5.el6.x86_64.rpm
–python-imaging-1.1.6-19.el6.x86_64.rpm
–telnet-0.17-47.el6_3.1.x86_64
