Combi HP thermostatic mixer shower

Fig.6 diagrammatic view (not to scale)

Height of

showerhead and shower to suit user’s requirement.

Shower can be

mounted either side

of the riser rail

Surface-mounted illustrated

PREPreparingARINGtheTHEmixerMIXERvalve VALVE

Before starting the installation, make sure all the openings on the valve are carefully covered to prevent ingress of any debris etc.

Note: It is not necessary to remove the control knobs at any stage.

SITINGiting ofOFtheTHEshowerSHOWER

WARNING!

The shower must not be positioned

W-008-A

where it will be subjected to freezing

conditions.

Refer to fig.6 for correct siting of the shower.

Position the shower and showerhead on the wall so that all controls can be comfortably reached while using the shower. The showerhead and riser rail can be positioned either side of the shower.

Note: Pipe entry for both surface-mounted and flush-fitted valves can be from the top, bottom or rear.

The hot entry port is on the left-hand side of the valve and is marked on the valve with a letter ‘H’

(fig.7).

Fig.7

T00226