HP Converged Network Adapters (CNA) Specifications, Cable specifications, General specifications

4 Specifications

Cable specifications

Table 2 Cable specifications

					Minimum
		Wavelength			modal
SFP+ module	Cable	(nm), type of	Core size		bandwidth	Maximum cable
type	connector type	cable	(microns µm)	Cable grade	(MHz-km)	length (meters)
10GBASE-SR	LC	850,	62.5	(“FDDI”)	160	26
(short range)		Multi-Mode	62.5	OM1	200	33
Optical		Fiber (MMF)
			50		400	66
Module
			50	OM2	500	82
			50	OM3	2000	300
10GBASE-CR	SFP+	N/A, Twin	24 to 28 AWG,	N/A	N/A	7
with Direct		Axial Copper	depending on
Attached			length and
Copper (DAC)			manufacturer
cable

General specifications

Table 3 General specifications

General specifications

Form factor

Dimensions (H x L x W) — standard height bracket

low profile bracket

Weight

Data rate

Value

Low profile. Card is available with standard height and low profile brackets.

10.67cm x 16.7 cm x 6.8 cm (4.2 in x 6.6 in x 2.7 in) 6.9 cm x 16.7 cm x 6.8 cm (2.7 in x 6.6 in x 2.7 in)

0.181 kg (0.4 lb)

Two fully independent 2/4/8 Gbps FC links delivering up to 1600MB/s total bandwidth per channel

Max transfer rate 10000 Mbps

Compliance

Table 4 Compliance

Compliance	Standard
IEEE	IEEE802.3x, IEEE802.3ad, IEEE802.1p, IEEE802.1q, IEEE802.3az,
	IEEE802.3ae, IEEE802.3ap, IEEE802.1qau
Safety	UL Mark (US and Canada)
	EN 60950
Other	PCIe v2.0
	RoHS 6 of 6
	IPv4, IPv6
	CE
	SFF-8431- 10 Gigabit Small Form Factor Pluggable Module “SFP+”
	SNMP

12 Specifications