Mass storage devices

NOTE: Each hard drive spare part kit and solid state drive spare part kit includes a bracket and screws.

Description

Spare part number

 

 

Hard drive, 160 GB, 5400 RPM

594809-001

 

 

Hard drive mounting kit

537641-001

 

 

Solid state drive, 16 GB

608396-001

 

 

Before removing the hard drive, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 36).

5.If your computer has WWAN capability, remove the SIM (see SIM on page 37).

6.Remove the keyboard (see Keyboard on page 40).

To remove the hard drive or the solid state drive:

1.Loosen the Phillips PM2.5×10.0 captive screw (1), and remove the 2 Phillips PM2.0×3.0 screws

(2)that secure the assembly to the computer.

2.Use the Mylar tab to slide the assembly to the left (3) to disconnect it, and remove the assembly (4).

Continue with one of the following sections for hard drive or solid-state drive replacement.

44 Chapter 4 Removal and replacement procedures