Hard drive

1.Remove the 4 Phillips PM3.0×3.0 screws (1) that secure the hard drive bracket to the hard drive.

2.Using the Mylar tab, lift the bracket (2) away from the hard drive.

Reverse this procedure to install a hard drive.

Solid-state drive

To remove the solid-state drive:

1.Remove the 4 Phillips PM2.0×3.0 screws (1) that secure the solid-state drive bracket to the solid- state drive.

2.Lift the solid-state drive (2) to remove it.

Reverse this procedure to install a solid-state drive.

Component replacement procedures 45