C500.1 Specifications
Power Output: RMS Continuous Power
(at 14.4V at the input terminals, 20Hz - 200Hz)
Per Channel into 4 Ohms (1% THD+N) | 350W |
Per Channel into 2 Ohms (1% THD+N) | 500W |
Total Dynamic Power (at 50Hz) | 875W |
Frequency Response | <15 Hz to 200Hz |
Input Sensitivity | 200mV to 8.0V |
Remote Gain Control | 0 to |
Input Impedance | > 10k Ohms |
Speaker Impedance | > 2 Ohms |
Power Requirement | 10V to 16V DC Negative Ground |
| |
Slope | 12 or 24dB/Octave |
Frequency | 30Hz to 200Hz |
Subsonic Filter | 24dB/Octave at 15Hz |
Bass Boost |
|
Center Frequency | 30Hz to 160Hz |
Bandwidth | 1/3 Octave |
Gain | 0 to 18dB |
| |
Center Frequency | 40Hz |
Bandwidth | 1/3 Octave |
Gain | +9dB |
Dimensions (L x W x H) |
|
Inches | 11 x 9.75 x 2.5 |
Centimeters | 27.94 x 24.8 x 6.35 |
Fiche technique du CC500.1
Puissance de sortie: Puissance RMS continue (14,4V à l’entrée, 20Hz - 20kHz)
Par canal, 4 Ohms (1% DHT+B) |
| 350W |
Par canal, 2 Ohms (1% DHT+B) |
| 500W |
Puissance dynamique totale |
| 875W |
Réponse en fréquences | <15Hz à 200Hz | |
Rapport | >100dBA | |
Sensibilité d’entrée |
| 200mV to 8,0V |
Contrôle de gain à distance |
| 0 à |
Impédance d’entrée |
| >10k Ohms |
Impédance sortie |
| >2 Ohms |
Puissance d’alimentation requise |
| 10V à 16V DC |
| masse négative | |
Filtres de séparation |
|
|
Pente | 12 ou 24dB/octave | |
Fréquence |
| 30Hz à 200Hz |
Bande passante |
| 1/3 d’octave |
Gain |
| 0 à 18dB |
|
| |
Pente |
| 40Hz |
Bande passante |
| 1/3 d’octave |
Gain |
| +9dB |
Dimensions (P x L x H) |
|
|
Pouces | 11 x 9,75 x 2,5 | |
Centimètres | 27,94 x 24,8 x 6,35 |
Polk/MOMO Series Limited Warranty
Polk Audio, Inc., warrants to the original retail purchaser only. This warranty will terminate automatically prior to its stated expiration if the original retail purchaser sells or transfers the Product to any other party.
Polk Audio, Inc., warrants, to the original retail purchaser only, that the LOUDSPEAKER(S), PASSIVE CROSSOVER COMPONENT(S) and ENCLOSURE on this Polk Audio Loudspeaker Product will be free from defects in material and workmanship for a period of one (1) year from the date of original retail purchase from a Polk Audio Authorized Dealer.
Furthermore, Polk Audio, Inc., warrants, to the original retail pur- chaser only, that any AMPLIFIER OR OTHER ELECTRONIC COMPO- NENT will be free from defects in material and workmanship for a period of one (1) year (extended to two years when professionally installed) from the date of original retail purchase from a Polk Audio Authorized Dealer.
To allow Polk Audio to offer the best possible warranty service, please register your new product online at: www.polkaudio.com/registration or call Polk customer service
Defective Products must be shipped, together with proof of pur- chase, prepaid insured to the Polk Audio Authorized Dealer from
whom you purchased the Product, or to the Factory at 2550 Britannia Boulevard, Suite A, San Diego, California 92154. Products must be shipped in the original shipping container or its equivalent; in any case the risk of loss or damage in transit is to be borne by you. If upon examination at the Factory or Polk Audio Authorized Dealer it is determined that the unit was defective in materials or workmanship at any time during this Warranty period,
Polk Audio or the Polk Audio Authorized Dealer will, at
its option, repair or replace this Product at no additional charge, except as set forth below. All replaced parts and Products become the property of Polk Audio. Products replaced or repaired under this warranty will be returned
to you, within a reasonable time, freight prepaid.
This warranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse,
negligence, inadequate packing or shipping procedures, commercial use, voltage inputs in excess of the rated
maximum of the unit, cosmetic appearance of cabinetry
not directly attributable to defect in materials or workmanship, or service, repair, or modification of the Product
which has not been authorized or approved by Polk Audio. This war- ranty shall terminate if the Serial number on the Product has been removed, tampered with or defaced.
22