Removal and replacement procedures
Left speaker
Description | Spare part number |
|
|
Speaker assembly (includes left and right speakers and speaker cables) | |
|
|
Before removing the left speaker, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see “Battery” on page 6).
5.Remove the following components:
a.Hard drive (see “Hard drive” on page 8)
b.Optical drive (see “Optical drive” on page 16)
c.Keyboard (see “Keyboard” on page 18)
d.Keyboard cover (see “Keyboard cover” on page 20)
e.Right speaker (see “Right speaker” on page 22)
f.Top cover (see “Top cover” on page 23).
Remove the left speaker:
1.Remove the two Phillips PM2.0×3.0 screws 1 that secure the left speaker to the top cover.
2.Release the left speaker 2 by lifting the left side until the speaker clears the base enclosure.
3. Remove the left speaker.
Reverse this procedure to install the left speaker.
Maintenance and Service Guide |
