![](/images/new-backgrounds/1153271/153271103x1.webp)
Removal and replacement procedures
Optical drive
✎The optical drive spare part kit includes an optical drive bezel and bracket.
Description | Spare part number |
|
|
|
|
DVD±RW and | |
|
|
Before removing the optical drive, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see “Battery” on page
5.Remove the hard drive cover (see “Hard drive” on page
Remove the optical drive:
1.Remove the Phillips PM2.5×6.5 retention screw 1 that secures the optical drive to the base enclosure.
2.If needed, insert a thin tool, such as a paper clip 2, into the release access. (The disc tray is partially ejected from the optical drive.)
3.Grasp the disc tray frame and slide the optical drive 3 out of the bay.
Reverse this procedure to install an optical drive.
Maintenance and Service Guide |