Description | Spare part number |
|
|
System board for use only with computer models equipped with an Intel Pentium or Celeron |
|
processor and a graphics subsystem with UMA video memory |
|
|
|
● For use in models without Windows 8 | |
|
|
● For use in models with Windows 8 Standard | |
|
|
● For use in models with Windows 8 Professional | |
|
|
System board for use only with computer models equipped with an Intel Pentium or Celeron |
|
processor and a graphics subsystem with UMA video memory (RCTO system board for use in |
|
Brazil and India only) |
|
|
|
● For use in models without Windows 8 | |
|
|
● For use in models with Windows 8 Standard | |
|
|
● For use in models with Windows 8 Professional | |
|
|
Thermal pad (for use with all models) | |
|
|
Before removing the system board, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 34).
5.Remove the following components:
●WLAN module (see WLAN module on page 42)
●Hard drive (see Hard drive on page 47)
●Keyboard (see Keyboard on page 53)
●Top cover (see Top cover on page 57)
●Speakers (see Speakers on page 65)
●USB board (see USB board on page 67)
●Power connector cable (see Power connector cable on page 69)
6.Disconnect the display cable from the system board (see Display assembly on page 71).
NOTE: When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board:
●Memory module (see Memory module on page 45)
●RTC battery (see RTC battery on page 50)
82 Chapter 4 Removal and replacement procedures