Fan/heat sink assembly

NOTE: The fan/heat sink assembly spare part kit includes replacement thermal materials.

Description

Spare part number

 

 

Fan/heat sink assembly for use only with computer models equipped with an AMD processor

688281-001

 

 

Fan/heat sink assembly for use only with computer models equipped with an Intel processor and a

685087-001

graphics subsystem with discrete video memory

 

 

 

Fan/heat sink assembly for use only with computer models equipped with an Intel processor and a

685086-001

graphics subsystem with UMA video memory

 

 

 

NOTE: To properly ventilate the computer, allow at least 7.6 cm (3.0 in) of clearance on the left side of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are affected by high external temperatures, system power consumption, power management/battery conservation configurations, battery fast charging, and software requirements. Exhaust air is displaced through the ventilation grill located on the left side of the computer.

Before removing the fan/heat sink assembly, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 34), and then remove the following components:

●WLAN module (see WLAN module on page 42)

●Hard drive (see Hard drive on page 47)

●Keyboard (see Keyboard on page 53)

●Top cover (see Top cover on page 57)

●Speakers (see Speakers on page 65)

●USB board (see USB board on page 67)

●Power connector cable (see Power connector cable on page 69)

●Display assembly (see Display assembly on page 71)

●System board (see System board on page 81)

Component replacement procedures 87