Speaker assembly

Description

Spare part number

 

 

Speaker assembly (includes cable)

641840-001

 

 

Before removing the speaker assembly, follow these steps:

1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect the power from the computer by unplugging the power cord from the computer.

3.Disconnect all external devices from the computer.

4.Remove the battery (see Battery on page 29), and then remove the following components:

a.Service cover (see Service cover on page 30)

b.Optical drive (see Optical drive on page 31)

c.Solid-state drive (see Solid-state drive on page 32)

d.Keyboard (see Keyboard on page 40)

e.Base enclosure (see Base enclosure on page 43)

Remove the speaker assembly:

1.Turn the base enclosure right-side up, with the front toward you.

2.Remove the two Phillips PM2.0×3.0 screws (1) that secure the speaker assembly to the base enclosure.

Component replacement procedures

47