10.If it is necessary to replace the display panel cable:
CAUTION: Before turning the display panel upside down, make sure the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display panel.
a.Turn the display panel upside down, with the display panel cable toward you.
b.Release the adhesive support strip (1) that secures the display panel cable to the display panel.
c.Disconnect the display panel cable (2) from the display panel.
d.Remove the display panel cable.
The display panel cable is available using spare part number
11.If it is necessary to replace the WLAN antenna cables and transceivers:
a.Release the WLAN antenna cables from the clips (1) and routing channel built into the display enclosure.
b.Detach the WLAN antenna transceivers (2) from the display enclosure. (The WLAN antenna transceivers are attached to the display enclosure with
Component replacement procedures | 65 |