4.Remove the top cover (3) from the display assembly.
5.If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a.Remove the rubber screw covers (1). The rubber screw covers are available in the Display Rubber Kit, spare part number
b.Remove the two Phillips PM2.5×5.0 screws (2) that secure the display bezel to the display assembly.
c.Flex the inside edges of the bottom edge (1), the left and right sides (2), and the
top edge (3) of the display bezel until the bezel disengages from the display enclosure.
Component replacement procedures | 61 |