Hardware Upgrades

Installing an Optional Optical Drive

To install an optional optical drive:

1.Remove the optical drive if present.

2.Install two guide screws in the lower holes on each side of the drive.

ÄCAUTION: Use only 3/16-inch or 5-mm long screws as guide screws. Longer screws can damage the internal components of the drive.

Installing Guide Screws in the Optical Drive

3.Position the guide screws on the drive into the J-slots in the drive bay. Slide the drive toward the front of the computer.

✎Ensure that the spring-loaded locking lever properly secures the drive.

2–22

Hardware Reference Guide