![](/images/new-backgrounds/1220642/22064283x1.webp)
6.Remove the drive bezel by pressing inward on all the tabs on the left, right, and bottom of the drive bezel (1) and pushing the drive bezel out of the larger front bezel (2).
NOTE The type of bezel will vary depending on the computer configuration.
Figure 2-29 Removing a Drive Bezel (Diskette Drive Bezel shown)
7.Replace the removed drive bezel with the appropriate bezel by pushing the bezel into place.
Figure 2-30 Installing a Drive Bezel (Bezel Blank for Hard Drive shown)
NOTE The type of bezel you need will depend on the type of drive you plan to install. If you are installing a diskette drive, you must install a diskette drive bezel (PN
8.Replace the computer cover.
9.If the computer was on a stand, replace the stand.
36 Chapter 2 Hardware Upgrades | ENWW |