3.From the list of Available Columns on the left of the dialog box, click the column titles to select those you wish to appear, then click the >> button.

These column titles are added to the Selected Columns list on the right of the dialog box.

4.To remove the properties from Selected Columns, click the column titles in that list to be removed, then click <<.

These column titles are removed from the Selected Columns list and returned to the Available Columns list.

NOTE: The Overall Status, IP Address, Name, Serial Number, Model, and Details columns cannot be removed. When one of these columns is selected, clicking the << button will result in a Warning dialog box.

Click OK to close the dialog box and continue.

5.To change the order in which the column appears, highlight a selected column and use the up or down arrow buttons below the Selected Columns list.

6.Click the OK button to save these settings.

NOTE: Click the Reset Columns button to restore the original columns.

Viewing topology

Replication manager allows the user to view the devices and the replication between them in a graphical format. In the topology view the user can see all the devices that are part of that group. He can also see the replication relation between the devices but this replication relation will be group specific (he will be able to see the replication only if either the source or target library/NAS Share is in the current group).

To view topology:

1.From the Navigation tree, select a group of devices to view (including All Devices or Un-Grouped).

All devices in the selected group appear in the main screen.

Viewing topology 23