2.Click View Topology to display the following topology information for the selected group:
•The status icon indicates device status.
•Lines between devices indicate a replication relationship. The color of a line indicates the status of replication, based on the worst status. For example, if one replication between devices is Critical, but the rest are Good, the line color is corresponds to the Critical status.
•A tool tip on the replication line provides more information about replication status.
•Click on the hyperlink to a device to view device details.
If there is no hyperlink for a listed device, the device is not part of the selected group.
3.If appropriate, filter what is included in the topology view:
a.From the topology view, in the Filter by field, select Device Status or Replication Status.
b.In the Equal to field, select the appropriate status (Critical, Warning, Unknown, Information, or Good).
c.Click Filter to display the data matching the filter criteria.
d.Click Reset to clear the filter and display all data for the device group.
4.If appropriate, use the zoom scale and Reset Zoom button, located on the right of the
• Click the – (minus) button to reduce the zoom level.
• Click the + (plus) button to increase the zoom level.
• Drag the slider between the plus and minus buttons to set the zoom to a value of your choice.
• Reset the zoom to the original level by clicking Reset Zoom.
5.If appropriate, click View Legend for information to interpret the data shown in the topology view. Click Close to exit the Topology Viewer Legend.
6.To update the information in the topology viewer, click Refresh.
The topology viewer is not updated automatically. Information that was current when you clicked View Topology is shown until you click Refresh.
Viewing device details
To view details of a specific device, follow one of these procedures:
24 Managing devices