HP DV8000, DV8200 manual Removing the Heat Sink

Removal and Replacement Procedures

2.Turn the system board upside down with the expansion port 2 toward you.

3.Remove the four silver Phillips PM2.5×6.0 screws 1 that secure the heat sink to the system board.

4.Remove the heat sink 2.

✎Due to the adhesive quality of the thermal paste located between the heat sink and processor, it may be necessary to move the heat sink from side to side to detach the heat sink from the processor.

Removing the Heat Sink

5–68 Maintenance and Service Guide