HP DV8000, DV8200 manual Removing a Mini PCI Communications Module

Removal and Replacement Procedures

✎Before disconnecting the antenna cables, make note of which cable is attached to which antenna clip on the Mini PCI communications module.

3.Disconnect the auxiliary and main antenna cables 1 from the Mini PCI communications module.

4.Spread the two retaining tabs 2 on each side of the Mini PCI socket to release the Mini PCI communications module. (The edge of the module opposite the socket rises away from the computer.)

5.Remove the Mini PCI communications module by pulling the card away from the socket at a 45-degree angle 3.

✎The Mini PCI communications module is designed with a notch 4 to prevent incorrect installation.

Removing a Mini PCI Communications Module

Reverse the above procedure to install a Mini PCI communications module.

5–16 Maintenance and Service Guide