HP dx2450 manual Removing Bezel Blanks

Removing Bezel Blanks

On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch external drive bays that need to be removed before installing a drive. To remove a bezel blank:

1.Remove the front bezel.

2.Press the two retaining tabs towards the outer left edge of the bezel (1) and pull the bezel blank inwards to remove it (2).

Figure 2-4Removing a Bezel Blank

3.Replace the front bezel.

12 Chapter 2 Hardware Upgrades ENWW