3.Connect the power cable (1) and data cable (2) to the back of the hard drive. Figure 2-32Connecting the Hard Drive Cables

CAUTION: Never crease or bend a SATA data cable tighter than a 30 mm (1.18 in) radius. A sharp bend can break the internal wires.

4.Place the hard disk drive cage into the chassis (1), then slide it down toward the bottom of the chassis until it locks into place (2).

Figure 2-33Installing the Hard Drive Cage

38 Chapter 2 Hardware Upgrades

ENWW

Page 44
Image 44
HP dx2450 manual 33Installing the Hard Drive Cage Hardware Upgrades