CAUTION: Removing a user-replaceable battery that is the sole power source for the computer can cause loss of information. To prevent loss of information, save your work or shut down the computer through Windows before removing the battery.

1.Turn the computer upside down on a flat surface.

2.Slide the battery release latch (1) to release the battery.

NOTE: The battery release latch automatically returns to its original position.

3.Pivot the battery (2) upward and remove it from the computer.

Finding battery information

To monitor the status of your battery, or if the battery is no longer holding a charge, run Battery Check in HP Support Assistant. To access battery information, from the Start screen, type support, select the HP Support Assistant app, and then select Battery and performance.

HP Support Assistant provides the following tools and information about the battery:

Battery test

Information on battery types, specifications, life cycles, and capacity

Conserving battery power

Tips for conserving battery power and maximizing battery life:

Lower the brightness on the display.

Select the Power saver setting in Power Options.

Remove a user-replaceable battery from the computer when it is not being used or charged.

Turn off wireless when you are not using them.

Disconnect unused external devices that are not plugged into an external power source, such as an external hard drive connected to a USB port.

Stop, disable, or remove any external media cards that you are not using.

Before you leave your work, initiate Sleep or shut down the computer.

Identifying low battery levels

When a battery that is the sole power source for the computer reaches a low or critical battery level, the following behavior occurs:

The battery light (select models only) indicates a low or critical battery level.

44 Chapter 6 Managing power

Page 54
Image 54
HP E0K10U 15.6 E0K10U#ABA manual Finding battery information, Conserving battery power, Identifying low battery levels