Chapter 5
See also
•Hardware Misfeed (Multipick) Detection
Scanning fragile originals
To safely scan fragile originals (photographs or documents on wrinkled or very lightweight paper) place originals in a clear, heavyweight document sleeve that is no more than 216 mm (8.5 in) wide before inserting into the document feeder.
TIP: If you do not have an
Paper does not feed from the scanner
The scanner hatch might not be securely latched. Open the scanner hatch and then close it by pressing firmly.
A problem with the scanner hardware might exist. Follow this procedure to test the scanner:
1.Ensure that the power supply is securely connected between the scanner and a live electrical outlet or surge protector. Check that the green LED on the power supply case is on to verify that the power supply is functional.
2.If the power supply is connected to a surge protector, ensure that the surge protector is plugged into an outlet and turned on.
3.Disconnect the power supply from the scanner and turn off the computer. After 60 seconds, reconnect the power supply to the scanner and then turn on the computer, in that order.
4.Try to rescan.
See also
Originals are curling up in the scanner output tray.
Under dry conditions, lightweight originals such as those printed on carbonless copy paper may curl in the output tray. To minimize curl, flatten curled edges on the originals before placing them in the document feeder. If you cannot flatten curled edges, make sure the curled edges are facing down when you place the originals in the document feeder.
36 Troubleshooting