HP FP1707, W1907, W2216 manual OSD Menu Selections, Cancel - to return to the previous menu level

Operating the Monitor

OSD Menu Selections

The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions. After changing an OSD menu item, and if the menu screen has these options, you may choose to:

■Cancel — to return to the previous menu level.

■Save and Return — to save all changes and return to the OSD Main Menu screen. This Save and Return option is active only if you change a menu item.

■Reset — to change back to the previous setting.

	Main Menu
Icon	Options	Submenu Options	Description
	Switch Video Input		Switches the video input signal source when the monitor is
	(select models only)		connected to two active and valid video sources. Switching
			video input sources may take several seconds.
	Brightness		Adjusts the brightness level of the screen.
	Contrast		Adjusts the contrast level of the screen.
	Image Control		Adjusts the screen image. Also enables or disables the ambient
			light sensor (select models only).
		Auto-Adjustment	Automatically adjusts the screen image (VGA Input only).
		Horizontal Position	Adjusts the horizontal position of the picture (VGA Input only).
		Vertical Position	Adjusts the vertical position of the picture (VGA Input only).

Custom Scaling (select models only)

Selects the method on how displayed information on the monitor will be formatted. Select:

Fill to Screen — Image fills the entire screen and might look distorted or elongated because of non-proportional scaling of height and width.

Fill to Aspect Ratio — Image is sized to fit the screen and maintains proportional image.

Sharpness

(select models only)

On a scale of 1 to 5, adjusts the screen image to look sharper or softer.

✎NOTE: If the one-to-one custom scaling menu is selected, scaling is disabled and the Sharpness feature is as well.

Ambient Light Sensor	Adjusts the brightness of the screen depending on the ambient
(select models only)	light of the environment. The sensor is on the left front of the
	monitor.
	By default the sensor is set to On. If you adjust the Quick View,
	Brightness, Contrast, or sRGB functions in the OSD, the
	ambient light sensor will automatically be disabled.
Clock	Minimizes any vertical bars or strips visible on the screen
	background. Adjusting the Clock will also change the
	horizontal screen image (VGA Input only).
Clock Phase	Adjusts the focus of the display. This adjustment allows you to
	remove any horizontal noise, and clear or sharpen the image
	of characters (VGA Input only).

4–4 User’s Guide