Hard drive

NOTE: The hard drive spare part kit includes a hard drive bracket and hard drive connector. The

hard drive bracket and hard drive connector, as well as the hard drive bracket screws, are also available in the Hard Drive Hardware Kit.

Description

Spare part number

 

 

750 GB, 5400 rpm

619686–001

 

 

640 GB, 5400 rpm

603785–001

 

 

 

500

GB, 5400 rpm (for models 1.1 only)

634638-001

 

 

 

500

GB, 7200 rpm

610583-001

 

 

0 GB, 5400 rpm (for models 1.1 only)

622643-001

 

 

 

320

GB, 7200 rpm

603783-001

 

 

0 GB, 5400 rpm (for models 1.1 only)

622641-001

 

 

 

250

GB, 7200 rpm

635225-001

 

 

 

160

GB, 7200 rpm

615076-001

 

 

Hard drive hardware kit (not illustrated, includes connector, bracket, and screws)

605919-001

 

 

 

Before removing the hard drive:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on the computer, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the computer.

4.Remove the battery (see Battery on page 41).

Remove the hard drive:

1.Position the computer with the front toward you.

2.Loosen the two Phillips PM2.5×6.0 captive screws (1) that secure the hard drive cover to the computer.

42 Chapter 4 Removal and replacement procedures