Modem module
Description | Spare part number |
|
|
56K V.92 data/fax modem (select models only) (for model 1.0 only) | |
|
|
Before removing the modem module:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on the computer, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the computer.
4.Remove the battery (see Battery on page 41).
5.Remove the following components:
a.Hard drive (see Hard drive on page 42)
b.Optical drive (see Optical drive on page 45)
c.Keyboard (see Keyboard on page 53)
d.Top cover (see Top cover on page 56)
Remove the modem module:
1.Turn the computer upright with the front toward you.
2.Remove the two Phillips PM2.0×3.0 screws (1) that secure the modem module to the system board.
3.Lift up on the front of the modem module (2) to disconnect it from the system board.
Component replacement procedures 63
