USB board
Description | Spare part number |
|
|
USB board | |
|
|
Before removing the USB board:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on the computer, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the computer.
4.Remove the battery (see Battery on page 41).
5.Remove the following components:
a.Hard drive (see Hard drive on page 42)
b.Optical drive (see Optical drive on page 45)
c.Keyboard (see Keyboard on page 53)
d.Top cover (see Top cover on page 56)
Remove the USB board:
1.Position the computer upright with the right side toward you.
2.Disconnect the USB board cable (1) from the system board.
3.Remove the Phillips PM2.5×6.0 screw (2) that secures the USB board to the base enclosure.
4.Lift the USB board (3) straight up to remove it from the computer. The USB cable is available with the cable kit using spare part number
Component replacement procedures 65