Analyzing the PCI Local Bus

Duplicating the

Master Diskette

Accessories Supplied

Minimum Equipment Required

This chapter introduces you to the PCI Scope Preprocessor and lists the minimum equipment required and accessories supplied for PCI Local Bus analysis.

Before you use the PCI Preprocessor software, make a duplicate copy of the master diskette. Then store the master diskette and use the back-up copy to configure your logic analysis system. This will help prevent the possibility of losing or destroying the original files in the event the diskette wears out, is damaged, or a file is accidentally deleted.

To make a duplicate copy, use the Duplicate Diskette operation in the disk menu of your logic analyzer. For more information, refer to the reference manual for the HP16500B mainframe.

The PCI Scope Preprocessor product consists of the following accessories:

∙The PCI Scope interface hardware, which includes the interface circuit module.

∙The MultiProbe configuration software on a 3.5 inch diskette.

∙This operating manual

The minimum equipment required for complete analysis of a PCI Local Bus consists of the following equipment:

∙An HP16500B based Logic Analyzer

∙An HP 16535A MultiProbe Control Module

∙A 208 pin MultiProbe Pod (HP part number E5322A)

8