HP L5006tm Touchscreen manual Using the On-Screen Display, OSD Menu Table

Using the On-Screen Display

Use the On-Screen Display (OSD) to display and select OSD menu functions. To access the OSD, do the following:

1.Press the Menu button on the side panel to activate the OSD menu.

2.Use the up arrow or down arrow controls to move clockwise or counterclockwise through the menu. Press the Enter key on the keyboard, the parameter will be highlighted when selected.

3.To quit the OSD screen at any time during the operation, press the Menu button. If the OSD remains untouched for a short period of time, the OSD automatically disappears.

NOTE: The OSD screen will disappear if no input activities are detected for 45 seconds.

OSD Menu Table

The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions. Settings will be saved automatically after adjustments are made.

Table 4-2 OSD Menu

Icon	OSD Control	Description
	Brightness	Increases or decreases brightness.
	Contrast	Increases or decreases contrast.
	H-Position	Adjusts the position of the screen image left and right.
	V-Position	Adjusts the position of the screen image up and down.
	Phase	Adjusts the focus of the display. This adjustment allows you to remove any horizontal
		noise and clear or sharpen the image of characters.
	Clock	Minimizes any vertical bars or strips visible on the screen background. Adjusting the
		Clock will also change the horizontal screen image.
	Sharpness	Adjusts the screen image to look sharper or soft.
	OSD H-Position	Moves the OSD position horizontally on the screen. When the up arrow button is
		pressed, the OSD menu will move to the right side of the screen. Likewise, when the
		down arrow button is pressed, the OSD control menu will move to the left side.
	OSD V-Position	Moves the OSD position vertically on the screen. When the up arrow button is
		pressed, the OSD menu will move to the top side of the screen. Likewise, when the
		down arrow button is pressed, the OSD control menu will move to the lower side.
	OSD Time	Adjusts the amount of time the OSD menu is displayed.
	Color Balance	Press the up arrow button or the down arrow button to select 9300, 6500, 5500, 7500
		or USER. Only when selecting USER can you make adjustments to the R/G/B (red/
		green/blue) content. Press Enter to restore the factory default setting.
	Auto-Adjustment	Press Auto to enable this function. The Auto-Adjustment will automatically adjust V-
		Position, H-Position, Clock and Clock-Phase.
	Recall Defaults	Returns the monitor to its default settings.

ENWW Using the On-Screen Display 13