Table
Select This Option | To Do This |
|
|
Cancel | Restores the previous settings and minimizes HP Display LiteSaver to the System |
| Tray. HP Display LiteSaver will continue to run. |
|
|
Help | Opens the online help file. |
|
|
Exit | Exits and closes the HP Display LiteSaver. It will no longer control the monitor power |
| until it is next run. |
|
|
View HP Display LiteSaver Readme on the CD for additional information on how to configure HP Display LiteSaver.
sRGB Support
The monitor is designed to support sRGB for color management, which adapts to the color standards used in the image technology industry.
To take advantage of the sRGB support, you need to change the monitor’s color temperature to sRGB and install the sRGB color profile (ICM) file.
NOTE: The sRGB color temperature preset improves the color accuracy of sRGB images on the computer monitor, but some color variation may still occur.
Changing the Color Temperature
1.Press the Menu button on the front panel of the monitor to launch the Main Menu of the OSD.
2.Select Color and press the Menu button.
3.Select sRGB and press the Menu button.
4.Select Save and Return and press the Menu button to exit the menu.
Installing the sRGB ICM File for Microsoft Windows 2000 and Windows XP
NOTE: To complete the following procedure, you must be logged in as an administrator or a member of the administrator’s group. If the computer is connected to a network, network policy settings may prevent you from completing this procedure. The sRGB ICM file does not support Windows 95 and Windows NT operating systems.
1.Click the Display icon in the Control Panel.
2.In the Display Properties windows, select the Settings tab, then click the Advanced button.
3.Select the Color Management tab, then click the Add button to open the Add Profile Association dialog box.
4.Select the sRGB Color Space Profile.icm file, then click the Add button.
5.To activate a color profile for the monitor, you must set it as the Default Monitor Profile. Select sRGB Color Space Profile, then click the Set as Default button.
6.Click Apply or OK.
30 Chapter 4 Operating the Monitor | ENWW |