Fuser exit roller assembly

1Remove all covers, the RFI shield, the printer door, the exit roller, the delivery assembly, the fuser pressure plate, the front casing, the heating element, the pressure roller, and the face-up/face- down lever.

2Remove the gear from the left end of the roller shaft by pressing down on the catching mechanism with the small flatblade screwdriver and pulling the gear away.

3Remove the exit roller assembly by pressing the small, white tab upward (callout 1) and rotating it around (callout 2).

4Slide the exit roller assembly forward and out to the right of the printer.

2

1

Figure 49. Fuser exit roller assembly removal

EN

Internal assemblies 121