Front casing
1Remove all covers, the RFI shield, and the printer door.
2Remove the two (2) screws (callout 1) from the right hinge holder.
Note | The lower screw on each of the hinge holders secures a small metal |
| grounding plate. Upon reinstallation, make sure the grounding plates |
| are in the correct position. |
|
|
1
Figure 44. Front casing removal
3Lift the right hinge holder from the frame.
4Repeat the procedure to remove the left hinge holder.
5Lift the front of the product up slightly and press the tabs at the bottom of the product to release the front casing.
6Lift the front casing away from the product.
To reinstall
Make sure that the paper path lever hooks into the
116 Removal and replacement | EN |