HP M1319 Reduce or enlarge the image, Reduce or enlarge copies for the current job, Copy setup

HP LaserJet M1319 MFP Series – Copy

Reduce or enlarge the image

How do I? Steps to perform

1 On the product control panel, press Reduce/Enlarge.

Reduce or enlarge copies for the current job

NOTE: If you select Custom: 25 to 400%, type a percentage	2	Select the size to which you would like to reduce or
by using the alphanumeric buttons.		enlarge the copies in this job.
If you select 2 pages per sheet or 4 pages per sheet, select
the orientation (portrait or landscape).
	3	Press Start Copy to save the selection and immediately
		start the copy job, or press OK to save the selection
		without starting the job.

Adjust the default copy size

1Press Setup.

NOTE: The product can reduce copies to as little as 25% of the original size or enlarge copies to as much as 400% of the original size.

2Use the arrow buttons to select Copy setup, and then

press OK. Copy setup

© 2008 Copyright Hewlett-Packard	1
	www.hp.com
Development Company, L.P.