Make my copy look better

HP LaserJet M1319 MFP Series – Copy

How do I?	Steps to perform
Adjust the copy quality for the current job	1 On the product control panel, press Quality to see the
Adjust the copy quality for the current job	current quality setting for the copy.

2 Use the arrow buttons to scroll through the quality setting options.

3 Select a setting, and then press Start Copy to save the selection and immediately start the copy job, or press OK to save the selection without starting the job.

	© 2008 Copyright Hewlett-Packard	1
		www.hp.com
	Development Company, L.P.

Page 9

Image 9

HP M1319 manual Make my copy look better, Adjust the copy quality for the current job

Contents

Load originals using the automatic Copy using the automatic document feeder ADFDocument feeder ADF Document loaded Collate my copy job Change the copy-collation setting forCurrent job Def Collation Copy on both sides Duplex Copy a two-sided original to a one-sidedDocument Document Copying a two-sided original to a two-sided Copying a two-sided original to a two-sided document Paper setup Change the default media-size settingCopy on preprinted letterhead or forms Def. paper size System setup Change the default media-type setting Def. paper type Paper setup Make my copy look better Adjust the copy quality for the current job Copy setup Adjust the default copy sizeReduce or enlarge the image Reduce or enlarge copies for the current job Def. Redu/Enlrg Change the default media-size setting Copy on media of different sizes and typesMedia sizes and types Paper setup Def. paper size Use the arrow buttons to select Paper setup, and then press System setup Paper setup Def. paper type