HP M1319 manual Copy using the automatic document feeder ADF, Load originals using the automatic

HP LaserJet M1319 MFP Series – Copy

Copy using the automatic document feeder (ADF)

How do I?	Steps to perform
Load originals using the automatic	1	Insert the top-end of the stack of originals into the ADF
		input tray, with the media stack face-down and the first
document feeder (ADF)		page to be copied at the bottom of the stack.
	2	Make sure that the ADF media lever is set correctly for
		single-page or multiple-page documents.

CAUTION: To prevent damage to the product, do not use	3 Slide the stack into the ADF until it does not move any
an original that contains correction tape, correction fluid,	farther.
paper clips, or staples. Also, do not load photographs,
small originals, or fragile originals into the ADF.

Document loaded appears on the control-panel

display. Document loaded

4 Adjust the media guides until they are snug against the media.

© 2008 Copyright Hewlett-Packard	1
	www.hp.com
Development Company, L.P.