Software 4-29

Table 4-3

CMC Terminal Program Menus

Main Menu Items

Submenu 1 Items

Submenu 2 Items

Brief Description

Values

 

 

Display rack information.

 

 

 

 

Status

 

 

Display rack status.

 

 

 

 

Network

 

 

 

configuration

 

 

 

 

IP configuration

 

 

 

 

 

 

 

IP Address

Set network addresses.

 

 

 

 

IP Subnetmask

 

 

 

IP Router

 

 

 

 

 

 

Trap receiver

 

 

 

configuration

 

 

 

 

IP Trap receiver

Set up to 4 trap receiver IP

 

 

 

 

addresses. Trap receiver

 

 

Enable/Disable

number 1 is dedicated to

 

 

IP Trap receiver

the Compaq Intelligent

 

 

Enable/Disable

Rack Manager software.

 

 

IP Trap receiver

Any IP address entered in

 

 

Enable/Disable

number 1 will be over

 

 

IP Trap receiver

written when used with the

 

 

Enable/Disable

software.

 

 

 

 

 

SNMP IP Access

 

 

 

 

 

Set the authorized IP

 

 

 

 

 

 

addresses of the

 

 

 

management computers.

 

 

SNMP Manager

In the default setting (all

 

 

SNMP Manager

addresses set to 0.0.0.0),

 

 

SNMP Manager

all network IP addresses

 

 

SNMP Manager

are SNMP-authorized. If

 

 

SNMP Manager

one or more IP addresses

 

 

SNMP Manager

are entered, only those IP

 

 

SNMP Manager

addresses have SNMP

 

 

SNMP Manager

authorization. SNMP

 

 

SNMP Manager

communication with the

 

 

SNMP Manager

CMC can only be

 

 

SNMP Manager

established from this

 

 

SNMP Manager

system.

 

 

 

 

continued