HP Management Controller Add/Remove Device Screen, Add, Remove, IP Address, Add/Remove Device, Add/Remove Device, Add/Remove Device

Software 4-7

Add/Remove Device Screen

Figure 4-3. Add/Remove Device screen

Click the Add/Remove Device link to access the Add/Remove Device screen. The Intelligent Rack Manager Lite software only recognizes CMC devices that are listed on the Add/Remove Device screen.

To add a CMC to the software:

1.Type the IP address of the CMC in the IP Address field. See “Setting the IP Address” in Chapter 2.

2.Click Add to add the CMC to the list of recognized devices.

NOTE: Type in a range of IP addresses to locate several CMC devices. The software only recognizes ranges at the end of an IP address, for example 200.200.200.201-213.

To remove a CMC from the software:

1.Highlight the IP address of the CMC you want to remove.

2.Click Remove to remove the CMC from the list of recognized devices.