Troubleshooting 5-3

Troubleshooting After Startup

For problems that occur after the CMC started, these suggested actions address possible causes.

Table 5-2

Troubleshooting Guide (After Startup)

Symptom

Possible Cause

Suggested Action

Audible Alarm

Alarm condition exists.

Check display or console for

 

 

error condition and clear.

 

 

 

Repairing the CMC

Repairs to the CMC must be carried out by Compaq or a Compaq authorized service representative. The only user-serviceable parts are the fuses located in the rear of the unit. If the fuses have opened, verify that the condition that caused the fault has been cleared. Replace the fuse with the exact rating as specified on the unit label. Contact your Compaq authorized service representative for more details.

WARNING: Disconnect all power cords before servicing the unit.