144CHAPTER 7: MANAGING AND MONITORING YOUR NETWORK
Deploy Your | Any changes you make to your network in 3WXM are saved when you |
Configuration | save the network plan on the server, but the changes are not applied to |
| your network until they are deployed. You see the changes in 3WXM, but |
| the changes are only local to 3WXM. |
| When you deploy the configuration, you send the configuration from |
| 3WXM to a live WX switch. This method makes it easy to apply a |
| configuration to multiple WX switches, or to deploy changes to a single |
| WX switch. |
To deploy the configuration in your network plan to the WX switch:
1From the 3WXM main menu bar, select Manage > Deploy. The Deploy Configurations wizard is displayed.
2Select the WX switch configuration you want to deploy. Verification is done on the configuration.
If errors or warnings are identified during verification, a message is displayed at the bottom of the window. After closing the Deploy wizard, click Configuration in the Alerts panel. The Config Verification tab is displayed. From there, you can correct errors or specify that 3WXM ignore the errors.
3Click Deploy Now to deploy the configuration.