92CHAPTER 4: USING RF AUTO-TUNING

Place Your

You will need to unpack and physically install your WX switches and

Equipment

MAPs. For information about installing your equipment, see “Equipment

 

Installation” on page 42.

 

 

Configure Initial

After installing a WX switch, you must use the command-line interface

WX Switch

(CLI) to prepare it for configuration and management by 3WXM. Use the

Connectivity

Web Quick Start (if available), or enter the quickstart command at the

 

CLI prompt. From there, you will:

 

„ Configure IP connectivity between the WX and 3WXM.

 

„ Enable secure communication between the WX and 3WXM or the

 

Web browser by installing certificates from a certificate authority (CA)

 

or a self-generated certificate.

 

For more information about configuring initial WX switch connectivity,

 

see the Wireless LAN Switch and Controller Installation and Basic

 

Configuration Guide.

 

 

Upload the WX

Retrieve the basic configuration information you added to the WX switch

Switch

and upload it into 3WXM.

Configuration into

 

a 3WXM Network

 

Plan