HP Manager Software manual 79

Configure Voice over Wireless IP Service 79

Table 12 Creating a Service for VoWIP Access (continued)

Task	Path	Primary Parameters to Configure
“Configure Local	Expand the WX switch icon in the	1	Click User:
Authentication” Organizer panel, right-click > AAA		„	Select New MAC Address User
on page 82	> Edit; click Local User Database
		2	Click User:
or
			User MAC Address: enter user’s VoWIP device MAC
Configure		„
			address
authentication
			(Optional)
using RADIUS		„
			MAC User Group: select a group
		„	Click Next
		3	From User Attributes tab:
		„	Select User Attributes
		„	Click Finish
“Configure	Expand the WX switch icon in the	1	From RADIUS Server tab:
RADIUS Server in Organizer panel, right-click AAA >		„	Click New RADIUS server
3WXM” on	Edit > RADIUS
page 61		„	Name: enter server name
or		„	IP Address: enter server IP address
Configure local		„	Key: enter key
authentication		„	Authorization password: enter password (required)
		„	Click Next
		2	From RADIUS Server Group tab:
		„	Click New RADIUS Server Group
		„	Name: enter a group name
		„	Click Choose Available: select a server
		„	Click Finish; then click Finish again
“Configure	N/A	Configure the AAA backend from a RADIUS server (not in
Attributes on the		3WXM):
RADIUS Server”		1	Setup each WX switch as a RADIUS client.
on page 63
		2	Define the 3Com vendor-specific attributes (VSAs) in
			the RADIUS server’s dictionary.
		3	Configure user record, where user name is the MAC
			address (entered with dashes)
		4	Configure user password, where the password is the
			authorization password defined in your WX RADIUS
			configuration (with dashes), and password
			authorization rules (username and password)
		5	Configure each user with the Vlan-Name attribute and
			other optional attributes