HP Manager Software manual 80

80CHAPTER 3: CONFIGURING WIRELESS SERVICES

Table 12 Creating a Service for VoWIP Access (continued)

Task	Path	Primary Parameters to Configure
“Specify	Expand the AAA icon in the	1	From MAC Network Access page:
Network Access	Organizer panel; right-click Network
Rules” on	Access Rules > Insert > MAC	„	Matching user Glob: enter **
page 64	Network Access		SSID: enter SSID name
		„
		2	From Authentication tab:
		„	Select Choose Available > RADIUS or Local
		„	Click Finish; then click Finish again
“Set Up VLANs	Expand the WX switch icon in the	Setup VoWIP VLAN.
on WX	Organizer panel, right-click VLANs	1	From VLAN Setup tab:
Switches” on	> Insert > VLAN
page 66	Note: 3Com recommends		VLAN ID: select number (must be unique)
		„
	completely isolating the VoWIP VLAN		VLAN Name: enter name (must be unique)
	as a best practice procedure in your	„
	WLAN.	„	IP Address: enter IP Address
		2	From VLAN Member Selection tab:
		„	VLAN Name: enter VLAN name for the VoWIP phones
		„	Available Members: select port(s) to reach other ports
			on the VoWIP VLAN or the VoWIP gateway/PBX; click
			Add
		3	From Spanning Tree tab:
		„	Select STP options
		4	From Spanning Tree Port Setup tab:
		„	Select STP port options
		5	From VLAN IGMP tab:
		„	Uncheck Enabled
		„	Click Finish
“Configure	Expand the WX switch icon in the	1	From ACL Setup tab:
Access Control Organizer panel, right-click on ACLs		„	Click New; select an ACE
Lists” on	> Insert
page 84		„	Enter ACE set up information
		„	Click Finish
		2	From ACL Map tab:
		„	Map ACL to VoWIP VLAN
		„	Click Finish