Configure Employee Access Services

55

Table 9 Creating a Service for Employee Access (continued)

Task

Path

Primary Parameters to Configure

“Specify

Expand the AAA icon in the

1

From 802.1X Network Access

Network

Organizer panel; right-click

 

tab:

Access Rules” Network Access Rules >

„

User Glob: enter **

on page 64

Insert > 802.1X Network

 

 

 

Access.

„

SSID: enter SSID name

 

 

2

From 802.1X Policy tab:

 

 

„

Select Enabled

 

 

„

EAP type: Pass-Through

 

 

„

Optionally for an offload

 

 

 

configuration

 

 

 

EAP type: PEAP, EAP Sub-Protocol:

 

 

 

MSCHAPV2

 

 

 

EAP certificate: install or generate

 

 

 

by means of the CLI

 

 

„

Click Choose Available:

 

 

 

Select the RADIUS server group

 

 

„

Click Finish

 

 

 

 

“Set Up

Expand the WX switch icon

1

From VLAN Setup tab:

VLANs on WX

in the Organizer panel,

„

VLAN ID: select number

Switches” on

right-click VLANs > Insert >

page 66

VLAN

„

VLAN Name: enter name

 

 

„

IP Address: enter IP Address

 

 

2

From VLAN Member Selection

 

 

 

tab:

 

 

„

Available Members: select port(s);

 

 

 

click Add

 

 

„

If the port is connected to an

 

 

 

802.1Q trunk line, select the Tag

 

 

 

checkbox and change the tag value

 

 

 

(if necessary)

 

 

„

Select PVST+ (if you wish to enable

 

 

 

it)

 

 

3

From Spanning Tree tab:

 

 

„

Select STP options

 

 

4

From Spanning Tree Port Setup

 

 

 

tab:

 

 

„

Select STP port options

 

 

„

Click Finish