Multiple Instance
Configuring MSTP
How to Save Your Current Configuration
You can save your current configuration before updating to a new version of software by following these steps:
1.Enter the show config files command to display your current configura- tion files, as shown in Figure
ProCurve(config)# show config files
Configuration files:
id | act pri sec | name |
1 | * * * | config1 |
2 | config2 | |
3 |
2.To save a configuration file for software version Z.12.43, enter this command:
ProCurve(config)# copy config config1 config configZ1243.cfg
You can choose any name for the saved configuration file that you prefer.
3.Display the configuration files as shown in Figure
ProCurve(config)# show config files
Configuration files:
id | act pri sec | name | |
* | |||
1 | * * | config1 | |
2 |
| config2 | |
3 |
| configK1243.cfg |
4.Now update your switch to the desired version, for example, Z.12.51. Enter the show flash command to see the results. The switch is now running the software version Z.12.51.